Autoquip Upender

90 Degree Upenders (also called “Flip-Flop Upenders”) are heavy industrial hydraulic tilters that safely upend or down-end a wide variety of heavy, bulky, or odd-shaped objects at controlled speeds. Double-acting hydraulic cylinders are used with the hydraulic power unit located inside or outside the tilter base frame.

Typical applications include coil and die handling, engine block manufacturing, coil reorientation, and palletizing or de-palletizing. 90 Degree Upenders have a footprint which is approximately equal to the sum of both tilter “wings” or decks.

Request FF Quote

Limit Switch

Limit switch, and mechanical stops, in both directions prevents overuse of the motor, extending its life cycle.

Reinforced Deck

Steel-reinforced platform minimizes deck deflection, maximizes load stability, and greatly extends its life.

Specifications

Base Model	Capacity	Platform		Lowered Height*	Ship Weight*	Quote Form
Base Model	Capacity	Min	Max	Lowered Height*	Ship Weight*	Quote Form
FF-020	2,000 lbs	24" x 36"	144" x 144"	10.5"	750 lbs	Quote
FF-040	4,000 lbs	24" x 36"	144" x 144"	10.5"	800 lbs	Quote
FF-060	6,000 lbs	24" x 36"	144" x 144"	10.5"	850 lbs	Quote
FF-080	8,000 lbs	24" x 36"	144" x 144"	10.5"	1,000 lbs	Quote
FF-100	10,000 lbs	24" x 36"	144" x 144"	10.5"	1,100 lbs	Quote
FF-120	12,000 lbs	36" x 36"	144" x 144"	12.5"	1,250 lbs	Quote
FF-150	15,000 lbs	36" x 36"	144" x 144"	12.5"	1,500 lbs	Quote
FF-200	20,000 lbs	36" x 36"	144" x 144"	12.5"	2,000 lbs	Quote
FF-250	25,000 lbs	48" x 48"	144" x 144"	15"	2,800 lbs	Quote
FF-300	30,000 lbs	48" x 48"	144" x 144"	15"	3,100 lbs	Quote
FF-400	40,000 lbs	60" x 60"	144" x 144"	15"	4,400 lbs	Quote
FF-500	50,000 lbs	60" x 60"	144" x 144"	15"	4,800 lbs	Quote
FF-600	60,000 lbs	60" x 60"	84" x 84"	18"	5,400 lbs	Quote

Model	FF-020	FF-040	FF-060	FF-080
Capacity	2K lbs	4K lbs	6K lbs	8K lbs
Min Top	24" x 36"
Max Top	144" x 144"
Down	10.5"
Weight	750 lbs	800 lbs	850 lbs	1000 lbs
Form	Quote	Quote	Quote	Quote

Model	FF-100	FF-120	FF-150	FF-200
Capacity	10K lbs	12K lbs	15K lbs	20K lbs
Min Top	24" x 36"	36" x 36"
Max Top	144" x 144"
Down	10.5"	12.5"
Weight	1100 lbs	1250 lbs	1500 lbs	2000 lbs
Form	Quote	Quote	Quote	Quote

Model	FFU-080	FFU-100	FFU-120	FFU-150
Capacity	8K lbs	10K lbs	12K lbs	15K lbs
Min Top	48"x72"	48"x72"	48"x72"	48"x72"
Max Top	54"x78"	60"x84"	54"x78"	60"x84"
Down	15"	15"	15"	15"
Weight	2900 lbs	2900 lbs	3000 lbs	3200 lbs
Form	Quote	Quote	Quote	Quote

Features

Joints, the most critical wear points in the lift, feature chrome-plated, 100,000 psi, ultimate-strength pins for premium load strength and long life.
Minimum 1/4-inch-thick steel-reinforced platform minimizes deck deflection, maximizes load stability, and greatly extends the life of the platform deck.
Chrome-plated rods improve durability extend the life of cylinders and seals.
Standard controls are prewired and drive unit is already onboard. Installation only requires the tilter to be lagged to the ground and connected to electricity.
Minimum 3:1 structural factor of safety makes these lifts the most structurally sound in the industry.

Exceptionally low lowered height allows greater on and off load flexibility.
Maintenance-free bearings at pivot points require no lubrication.
Manual override valves allow partially tilted loads to be manually lowered in the event of power loss or other unforeseen emergency.
Sturdy, semi-transparent polyurethane oil reservoir provides an easily visible method of checking fluid levels and eliminates oil contamination due to rust.
Double wire braided Parker hydraulic hoses resist wear, abrasion, and leaks.
Counter-balance valving controls the descent of a loaded tilter platform.
Solid steel linkages provide structural integrity and stability throughout the tilting process.

Options

"V" Craddle
Remote Power Units
Electric Toeguards
Foot Operated Control

Accordion Skirting
Conveyor Tops
Ball Transfer Tops
Limit Switches